Commercial Pool Lights

Pool Lights for commercial applications

Pool lights for commercial applications in IP68 and stainless steel 316L or 904. Manufactured in Germany from WIBRE. The widest range of commercial pool lights with many sizes, wattages, colours, beam spreads and controls. Many accessories as well. If the variety of fittings is not enough or you need something special, WIBRE does customizations as well. Ask also for solutions for your retrofit requirements.

Some lighting design guidance can be found here and an Aquatic Center case study here.

WIBRE Germany pool lights 4.0012
WIBRE 4.0282 big pool light

WIBRE, Germany



50mm diameter, IP68

all whites, solid colours, RGB

WIBRE, Germany


9 – 28W LED

130mm diameter, IP68

solid colours, all whites, RGB

WIBRE, Germany 4.0199

42 – 85W LED

210mm diameter, IP68

solid colours, all whites, RGB

WIBRE, Germany


62 – 110W LED

240mm diameter, IP68

solid colours, all whites, RGB, RGB-W, RGB-A

WIBRE pool lights 4.0199
WIBRE 4.0171 mid pool lights
WIBRE pool lights 4.2000 big

WIBRE, Germany


200W LED – 400W HID

490mm dia, IP68

all whites

More types from WIBRE, Germany available here.

Typical available beam spreads for LED: 10/30/45/90 and 15 x 40 degree oval

Frosted lenses possible.

LED’s with warm white, neutral white, daylight

Single colours: green red, amber, turquoise, capri blue.


Installation housings for all kind of pool materials.

Special underwater cable, connectors and branch boxes

Customizations possible – please contact us.

WIBRE underwater orienation light big

WIBRE, Germany


15W LED orientation light

550mm dia, IP68 on request, contact us

all whites and solid colours

The fitting material for commercial pool lights should be stainless steel 1.4571/316L or for higher salt concentrations or warm salt water higher alloyed steel 1.4539/904L and also electro polished to further enhance the corrosion resistance. Contrary to popular belief stainless steel can in fact stain and discolour, in particular when incorrectly treated and finished.The same is true for the installation housing and all other fitting parts e. g. cable glands which also should be made from the appropriate stainless steel.

The fittings in commercial applications should be recessed to avoid that they can be used as steps.

According to the current wiring rules AS/NZS 3000:2007 every pool light fitting requires one individual power supply or a special transformer with a secondary winding for each pool light.